stringtranslate.com

Radium release hitch

A radium release hitch is a load-releasing hitch using 3:1 mechanical advantage which is used in a two-rope technical rescue system.[1] The Radium Release Hitch allows a load to be transferred from one rope to another and is commonly rigged into the belay line prior to the operation of a two-rope technical rescue system.[2]

A radium release hitch is typically tied with 10 meters of 8mm rope and two locking carabiners. A reasonable length for the hitch (distance between the 2 carabiners) is 10 to 15 cm.[3]

History

The Radium Release Hitch was developed by Kirk Mauthner (who lives near Radium Hot Springs, hence the name) as a result of the extensive comparative analysis of release devices undertaken during 1997 through 1999[4]

Usage

Tying

See also

List of knots

Mountain Rescue

References

  1. ^ Matthews, M. (2009). Technical Rescue: Rope Rescue: Rope Rescue, Levels I and II. Delmar/Cengage Learning. p. 83. ISBN 1428320563.
  2. ^ Grogono, Alan W. Grogono (Grog), David E. Grogono, Martin J. "Radium Release | How to tie the Radium Release Hitch | Rescue Knots". www.animatedknots.com. Retrieved 2016-09-21.{{cite web}}: CS1 maint: multiple names: authors list (link)
  3. ^ a b "Knots and Hitches" (PDF). whitewater-rescue.com. Air Medical Resource Group. 2004. Retrieved September 21, 2016.
  4. ^ Release-Devices: A Comparative Analysis, by Katie and Kirk Mauthner, 1999
  5. ^ Jido (2010-06-11). "San Juan County Search and Rescue: Radium Release Hitch". San Juan County Search and Rescue. Retrieved 2016-09-21.
  6. ^ "Load Releasing Hitch" (PDF). stowemountainrescue. stowemountainrescue. Retrieved September 21, 2016.