Engine power

Engine power is the power that an engine can put out. It can be expressed in power units, most commonly kilowatt, pferdestärke (metric horsepower), or horsepower. In terms of internal combustion engines, the engine power usually describes the rated power, which is a power output that the engine can maintain over a long period of time according to a certain testing method, for example ISO 1585. In general though, an internal combustion engine has a power take-off shaft (the crankshaft), therefore, the rule for shaft power applies to internal combustion engines: Engine power is the product of the engine torque and the crankshaft's angular velocity.

Definition

Power is the product of torque and angular velocity:^[1]

Let:

• ${\displaystyle P=}$ Power in Watt (W)
• ${\displaystyle M=}$ Torque in Newton-metre (N·m)
• ${\displaystyle n=}$ Crankshaft speed per Second (s⁻¹)
• ${\displaystyle \omega =}$ Angular velocity = ${\displaystyle 2\pi n}$

Power is then:

${\displaystyle P=M\cdot \omega }$

In internal combustion engines, the crankshaft speed ${\displaystyle n}$ is a more common figure than ${\displaystyle \omega }$, so we can use ${\displaystyle 2\pi n}$ instead, which is equivalent to ${\displaystyle \omega }$:^[2]

${\displaystyle P=M\cdot 2\pi \cdot n}$

Note that ${\displaystyle n}$ is per Second (s⁻¹). If we want to use the common per Minute (min⁻¹) instead, we have to divide ${\displaystyle n}$ by 60:

${\displaystyle P=M\cdot 2\pi \cdot {n \over 60}}$

Usage

Numerical value equations

The approximate numerical value equations for engine power from torque and crankshaft speed are:^[1][3][4]

International unit system (SI)

Let:

• ${\displaystyle P=}$ Power in Kilowatt (kW)
• ${\displaystyle M=}$ Torque in Newton-metre (N·m)
• ${\displaystyle n=}$ Crankshaft speed per Minute (min⁻¹)

Then:

${\displaystyle P={M\cdot n \over 9550}}$

Technical unit system (MKS)

• ${\displaystyle P=}$ Power in Pferdestärke (PS)
• ${\displaystyle M=}$ Torque in Kilopondmetre (kp·m)
• ${\displaystyle n=}$ Crankshaft speed per Minute (min⁻¹)

Then:

${\displaystyle P={M\cdot n \over 716}}$

Imperial/U.S. Customary unit system

• ${\displaystyle P=}$ Power in Horsepower (hp)
• ${\displaystyle M=}$ Torque in Pound-force foot (lbf·ft)
• ${\displaystyle n=}$ Crankshaft speed in Revolutions per Minute (rpm)

Then:

${\displaystyle P={M\cdot n \over 5252}}$

Example

Torque and power diagram of the example diesel engine

The power curve (orange) can be derived from the torque curve (blue)
by multiplying with the crankshaft speed and dividing by 9550

A diesel engine produces a torque ${\displaystyle M}$ of 234 N·m at ${\displaystyle n}$ 4200 min⁻¹, which is the engine's rated speed.

Let:

• ${\displaystyle M=234\,N\cdot m}$
• ${\displaystyle n=4200\,{min}^{-1}=70\,s^{-1}}$

Then:

${\displaystyle 234\,N\cdot m\cdot 2\pi \cdot 70\,s^{-1}=102,919\,N\cdot m\cdot s^{-1}\approx 103\,kW}$

or using the numerical value equation:

${\displaystyle {234\cdot 4200 \over 9550}=102.91\approx 103}$

The engine's rated power output is 103 kW.

Units

See also

• List of production cars by power output

Bibliography

• Böge, Wolfgang (2017), Alfred Böge (ed.), Handbuch Maschinenbau (in German), Wiesbaden: Springer, ISBN 978-3-658-12528-8

• Böge, Alfred (1972), Mechanik und Festigkeitslehre (in German), Wiesbaden: Vieweg, ISBN 9783528140106

• Kemp, Albert W. (1998), Industrial Mechanics, American Technical Publishers, ISBN 9780826936905

• Fred Schäfer, Richard van Basshuysen, ed. (2017), Handbuch Verbrennungsmotor (in German), Wiesbaden: Springer, ISBN 978-3-658-10901-1

References

1. Böge 2017. p 233
2. Fred Schäfer, Richard van Basshuysen 2017. p. 21
3. Böge 1972. p 154
4. Kemp 1998. p 259