Wikipedia:Did you know/Prep builder instructions

Shortcut

• WP:DYKPBI

After DYK hooks are approved, the nominations is closed and a hook is promoted to the prep areas, where it is scheduled and possibly workshopped. If you feel like doing that closing and promoting, this is the right place for you! Prep building, as it's called, is vital to keeping DYK's gears turning, and it allows experienced behind-the-scenes editors to exercise a little bit of quality control (in accordance with the wishes of the nominator and the community at large). This page will tell you what checks you need to make, and then walk you through the steps of promoting a hook.

If this is your first time promoting a hook, welcome to the fold! Be sure to read WP:DYKPBR to get a sense of the promoter's guidelines. Don't be afraid to make mistakes when you're starting out, and WT:DYK is where you can get answers to all your questions about the process.

Procedure

You are required to check ...

• ... that the nomination has been approved.
• ... that no outstanding issues raised in the nomination remain relevant.
• ... that the article has not been substantially edited since the last approval.
• ... that the hook is cited.
• ... that the hook is interesting.
• ... that any images are freely licensed, clear at a diminshed size, and used in the article.
• ... that the nomination is being promoted in compliance with the rules for prep building.

Instructions

Automated

The automated method requires the prep set's half-assed workbench (PSHAW) – instructions on how to install it in your userspace can be found there.

• Open the nomination page of the hook you want to promote.
• Under the "more" drop-down menu (where you would move a page), select "PSHAW".
• Choose, by inputting a number, which prep set you would like to add a hook too. Once you click "load prep/queue", it should generate the prep set and a list of hooks from the nomination page to choose from.
• Pick an empty destination slot, a hook to send over, and an image if applicable.
• Click "submit!".

Manual

Adding the hook to prep

• In one tab, open the nomination page of the hook you want to promote.
• In a second tab, open the prep set you intend to add the hook to.

1. For hooks held for specific dates, refer to "Local update times" section on DYK Queue.
   • Completed Prep area number sets will be promoted by an administrator to corresponding Queue number.
2. Copy and paste the hook into a chosen slot.
   • Make sure there's a space between ... and that, and a ? at the end.
   • Check that there's a bold link to the article.
3. If it's the lead (first) hook, paste the image where indicated at the top of the template.
4. Copy and paste ALL the credit information (the {{DYKmake}} and {{DYKnom}} templates) at the bottom
5. Check your work in the prep's Preview mode.
   • At the bottom under "Credits", to the right of each article should have the link "View nom subpage" ; if not, a subpage parameter will need to be added to the DYKmake.
6. Save the Prep page.

Closing the nomination page

1. At the upper left:
   • Change {{DYKsubpage to {{subst:DYKsubpage
   • Change |passed= to |passed=yes
2. At the bottom
   • Just above the line containing

     }}<!--Please do not write below this line or remove this line. Place comments above this line.-->

     insert a new, separate line containing one of the following:

     To [[T:DYK/P1|Prep 1]]

     To [[T:DYK/P2|Prep 2]]

     To [[T:DYK/P3|Prep 3]]

     To [[T:DYK/P4|Prep 4]]

     To [[T:DYK/P5|Prep 5]]

     To [[T:DYK/P6|Prep 6]]

     To [[T:DYK/P7|Prep 7]]

   • Also paste the same thing into the edit summary.
3. Check in Preview mode. Make sure everything is against a pale blue background (nothing outside) and there are no stray characters, like }}, at the top or bottom.
4. Save.

Rejecting a nomination

To close a nomination because it was withdrawn by the nominator or rejected by a reviewer, use PSHAW.