Канадская провинция Онтарио впервые потребовала от своих жителей зарегистрировать свои автомобили в 1903 году. Зарегистрированные лица предоставляли свои собственные номерные знаки для демонстрации до 1911 года, когда провинция начала выдавать номера. [1] Таблички в настоящее время выдаются Министерством транспорта Онтарио (MTO). Расположение номеров определяется Законом о дорожном движении [2] и Постановлением 628, предусмотренным Законом. [3]
Символ короны, представляющей Корону Канады, появился почти на всех номерных знаках Онтарио с 1937 года, когда он впервые был использован в ознаменование коронации короля Георга VI и королевы Елизаветы . Исключения из этого правила включали серию номерных знаков, выпущенных с 1951 по 1952 год из-за нехватки металла во время Корейской войны; [4] и серия фермерских номеров, выпущенных в 1980-х и 1990-х годах.
Политик из Торонто и лидер Ордена оранжистов Лесли Сондерс возглавил протесты против предложения снять корону в 1948 году, но правительство отменило это решение. [5]
В 1956 году Канада, США и Мексика пришли к соглашению с Американской ассоциацией администраторов транспортных средств , Ассоциацией автопроизводителей и Национальным советом по безопасности , которое стандартизировало размер номерных знаков для транспортных средств (кроме мотоциклов ) на уровне 6. дюймов (15 см) в высоту и 12 дюймов (30 см) в ширину, со стандартными монтажными отверстиями. [6] Выпуск 1954 года (датированный 1955 годом) был первым номерным знаком Онтарио, который соответствовал этим стандартам.
After 1973, Ontario ceased to issue plates annually. Instead, validation was indicated by means of stickers affixed to the top right of the rear plate. All Ontario license plates issued since 1973 remain valid for display.
In 1973, the "Keep it Beautiful" slogan was introduced to Ontario passenger plates. In 1982, the slogan was changed to "Yours to Discover". The adjustment was made to reflect the province's new tourism campaign.[9]
In April 2019, the Government of Ontario announced that the plates would be redesigned. The plates' design includes a superficial laminate layer manufactured by 3M.[10] The plates have a two-tone blue background with white letters and numbers flanking a stylized white trillium, and no longer embossed. The motto was also changed to "A Place to Grow", taking inspiration from Ontario's unofficial anthem "A Place to Stand, a Place to Grow".[11]
Issue of the new plates began in February 2020. The new plates faced criticism from law enforcement agencies, as their new design made them difficult to read in certain lighting conditions. Concerns were also raised that photo radar systems would have difficulty reading them, due to the lighting issues, as well as the smaller sizing of their "Ontario" text. On February 20, 2020, Premier Doug Ford stated that the government planned to recall the initial batch, and was working with 3M on improvements.[12] However, on May 6, 2020, a spokesperson for Ford announced that the blue plates would be discontinued entirely after "thorough testing by law enforcement and other key stakeholders". The previous white plates were reinstated, with their coating also made more durable, although the blue plates continued to be issued through early-June until their supply was exhausted.[13][14]
Historic vehicle license plates were introduced in 1969 as yearly plates. In 1973, plates switched to permanently issued plates validated with stickers.
Vehicles more than 30 years old and substantially unchanged since manufacture may qualify for a "Historic" registration.[24]
Annual fees were much lower ($18 vs $120 for a passenger car until 2022),[25] but historic vehicles may not be used as conventional transportation. They legally may only be driven to and from events and parades where the vehicle is on display, to garages for maintenance, and other similar use cases. Annual renewal stickers are affixed to the rear plate, as with passenger vehicles.
Historic plates are not to be confused with year-of-manufacture plates.[26]
Unlike passenger cars, plate validation stickers for commercial vehicles are placed on the front plate, instead of the rear. This placement is consistent between trucks with visible rear plates, and tractor units where the rear plate is obscured by a trailer. Ontario vehicles registered in the International Registration Plan receive special commercial plates with "PRP" screened vertically at the left.
All pickup trucks are legally considered commercial vehicles and thus require commercial plates. However, if used strictly as a passenger vehicle ("personal-use vehicle"), a truck may be exempt from some conditions imposed on commercial vehicles, indicated by a white or red "PERSONAL USE ONLY" sticker affixed in the top left corner of the front plate.[27]
Commercial license plates were first introduced in 1916.
In 1963, Ontario switched to a quarterly system for commercial plates. Plates could be issued on a quarterly basis rather than paying for a full year of registration.
In the 1980s, Ontario shifted to plates that were renewed yearly with stickers, ditching the quarterly system.
Used on vehicles registered in the International Registration Plan (IRP).
Bus license plates were first issued in 1973. They followed the quarterly system until 1980, switching in favour of a new permanent plate renewed yearly with stickers.[28]
School Bus license plates were first issued in 1975 under a yearly registration. Unlike regular bus license plates, these plates expired in June at the end of the school year. In 1980, these yearly issued plates were phased out for permanent plates revalidated with stickers annually.[28]
Farm plates were introduced in 1978 using the quarterly system. In 1980, the plates were switched to permanent plates revalidated with stickers.[28]
Vehicles over 3000 kg owned by farmers and used for farm-related purposes, such as working the soil, building maintenance, and the transportation of farm products, may qualify for a farm plate. Farm-plated trucks and towed trailers may also be used by a farmer for personal transportation.
To qualify, a farmer must meet a series of criteria, including membership in farming organisations and a minimum amount of income that derives from farming. Fees for farm plates are substantially lower than for passenger or commercial plates. The Highway Traffic Act also exempts farm vehicles from several requirements imposed on commercial vehicles.[29]
Farm plates are black on white with a black crown separator, in a pattern similar to commercial plates. They have the word "FARM" written vertically on the left of the plate. Validation stickers are the same as for other vehicles, and are affixed to the front plate, as with commercial plates.
All trailers in Ontario are considered separate vehicles and must have a permit and be plated. New owners of a trailer must register with the MTO within six days of purchase. They are then issued with a permit and a plate. Trailer plates are not renewed annually, but may be replaced if lost, damaged or stolen. Plates are affixed to the rear of the trailer. There is no front plate.[30]
All trailers, whether used by commercial operators or others, use a same model plate. Plates are blue on white with crown separator, in a pattern and colour similar to that of passenger vehicles, with the word "TRAILER" written vertically on the left of the plate. However, they do not follow the same numbering system as other vehicles.
Trailer plates were first introduced in 1921. Plates issued from 1921 to 1929 had the letter T at the front. In 1930, the letter T was moved to the end of the number. A quarterly system was introduced for trailers starting in 1963.[28]
By 1973, the quarterly system was phased out in favour of a semi-permanent plate validated each year with an annual sticker. As of 1980, trailer plates no longer require yearly validation stickers, rather a one time fee.[28]
Motorcycle plates were first issued in 1911.[28] Issued yearly until 1980 when they switched to yearly renewal with validation stickers.
These license plates are issued to ATVs and other vehicles for off roading uses.
Unlike all Ontario license plates — which were changed to reflective plates in 1994 — the snowmobile plates remain non-reflective.
Dual purpose license plates were first introduced in 1927. They were issued to vehicles that could be used for both personal and commercial purposes. Vehicles such as RV's, station wagons & motor-homes.[28] They were noted by the X prefix. However, these plates were discontinued in 1973 and are no longer issued.
In Ontario, diplomatic plates were first issued in the 1950s. The first red licence plate was issued in 1959. Yearly plates were issued until 1986, when permanent plates renewed with stickers were introduced the following year. The ABC-123 serial format began in 1973.[28]
The current design is a white serial on red plate, using the 123-ABC serial format. "YOURS TO DISCOVER" is screened at the bottom. The red plate colour is exclusive to diplomatic plates.
Any foreign representatives and their accredited family members are required to obtain special red diplomatic licence plates when registering passenger vehicles within 30 days of taking up residence in the province. This rule does not apply to the registration of motorcycles.[32]
These plates are most commonly found in Ottawa and Toronto where embassies and foreign government operations are located.
In Ontario, motor vehicle dealers licensed under the Motor Vehicle Dealers Act use a single portable plate with the word "DEALER" on the left side and red alpha-numeric characters on a white background. It is for exclusive use by motor vehicle dealers only on motor vehicles owned as part of the dealer's inventory of vehicles for sale. It may also be used for private use vehicles that are owned as part of the dealer's inventory of vehicles for sale.[34]
Service providers, including anyone who repairs, customizes, modifies, manufactures or transports motor vehicles or trailers use yellow and black DLR series plates (Dealer and Service Plate).
A service plate may be used:
Private use of motor vehicles or trailers with a service plate is not permitted.
Dealer plates for motorcycles have been issued since the 1920s.[28] Very few of these early plates were issued, thus making it a rare plate. The 'M' prefix was featured on all plates before 1973. From 1973 to 1979 they were issued with the 'DL' prefix, with a similar design to regular Motorcycle plates. In 1982, the government began issuing permanent plates with yearly registration stickers.[28] Reflective plates were introduced in 1994.
The current plate design is a white serial on a light blue plate. These plates are the same size as regular motorcycle plates. The serial format used by these plates is AB123, running from AA001 to AF965 (as of February 23, 2020)[17]
Medical doctor plates were first introduced in 1930, and are denoted by the letters starting with MD. When all the MDA - MDZ serials had been issued in the late 1990's [date missing], new serials using MAA started being issued.
Amateur Radio plates were introduced in 1969 as supplemental plates. In 1976, Ontario permitted the call-sign to be on regular passenger plates, eliminating the small supplemental plates.[28]
Along with regular series plates, the province also offers vanity plates for passenger and commercial vehicles. A personalized licence plate message may contain almost any combination of letters and numbers from two to eight characters. The plates can also include one of 60 different graphics,[36] with two to six characters. Available graphics have changed over the years, with some becoming available, while others have been withdrawn or modified. Owners selecting a graphic but no custom message are generally assigned a registration with a 12XY34 pattern, where the XY is a code indicating the design (i.e.: LN and LM = Loon, CF = Canadian Flag, etc.).
The province reserves the right to refuse or withdraw plates for a variety of reasons,[37] including:
While criteria have existed since the introduction of personalized plates, accusations of excessive zeal led the McGuinty government to set up a review committee in August 2008. The eight-member committee meets weekly to review submissions. In the first half of 2013, it had rejected 3% of requests.[38] Plates have also been withdrawn after issue.[39]
The COVID-19 pandemic of 2020 brought renewed attention to the work of the Personalized License Plate Review Committee as it rejected personalized plates based on this theme.[40]
The ownership of plates with graphic elements associated with particular groups, such as veterans or firefighters, may be restricted and require proof of eligibility.
Personalized plates with two to five characters are also available for motorcycles.
Plates with graphics are also available.[41] Graphics first being issued on license plates began in 1996. The variety of graphics includes charities, universities, community organizations and popular Ontario sports teams, such as the Ottawa Senators. All plates offer the French slogan since 2017.[28]
Certain graphics have been discontinued and are no longer issued. A plate design is considered discontinued once it is no longer offered at ServiceOntario.
Ontario licence plates were formerly manufactured by prison inmates at the Millbrook Correctional Centre in Cavan-Millbrook-North Monaghan.[44] Upon Millbrook's closure in 2003,[45] manufacture was moved to the Central East Correctional Centre in Lindsay, Ontario.[46] Since 1991, all Ontario plates have been manufactured for the MTO by Trilcor Industries, owned by the province's Ministry of the Solicitor General.[47][48] From 2017 to 2018, the plates were manufactured by Waldale Manufacturing of Nova Scotia, because Ontario's prison made plates ran out due to the peeling and bubbling in the preceding "B" series. The plates made by Trilcor Industries returned in 2018, to avoid license plate issues with the Nova Scotia license plates.
In 2016, an increase in the rate of defective plates combined with an increase in the number of registered vehicles led to the Ontario Ministry of Transportation becoming unable to keep up with demand for plates. It placed an order for 100,000 units from the Waldale Irwin Holdson Group, the largest licence plate manufacturer in North America.[49] Plates are produced by the Waldale Manufacturing facility in Amherst, Nova Scotia.
Plates from the first batch of 35,000 can be identified due to the use of embossed letters and numbers from Nova Scotia plates, which differ in appearance from Ontarian fonts.[50] The province continues to order supplementary batches of plates from Waldale. Since 2017, the Ontario die set has been in use. These plates are almost identical to those made by Trilcor Industries. The Waldale made plates have squared off edges and smaller bolt holes.[51]
In 2012, reports began to appear of plates deteriorating earlier than otherwise expected. The reflective layers detached themselves from the metal plate, making the plate unreadable. Approximately 1% of licence plates issued have this defect. The defect has appeared in both front and rear plates. Trilcor Industries and the MTO offer a five-year warranty on plates and will replace the defective plates at no cost.[52] Plate replacement for other reasons (theft, damage, wear, etc.) is done at a cost.
Conventional plates can be replaced "over-the-counter" at a licence office, but the complete process for personalized plates takes over six months.[53]
Driving with an illegible plate is an offence punishable by fine, under the Highway Traffic Act.[54]
In 2015, the Ministry of Community Safety and Correctional Services hired Canada's National Research Council to identify the root cause of licence plate de-lamination. The NRC's report indicated that the reflective material adhered poorly to the aluminium plates, and that embossing process stressed the materials to the point that the reflective layer would puncture and de-laminate. At that point, water and other contaminants could slip between the layers. Also, road de-icing materials contributed to the de-lamination. The report found that this problem was present in samples from all types of plates, except for motorcycle plates.
The report recommended that Trilcor work with its supplier of laminating layer to resolve the problem, and indicated that a thicker layer of material would likely perform better.[55]
Many vehicle owners place clear plastic covers over their licence plates to protect their already defective licence plates (2012) from premature deterioration.[56] According to Ontario's Highway Traffic Act Section 13.2, licence plate covers are considered an obstruction and are illegal in the province of Ontario.[57] In the rare event that the officer chooses to issue the citation, the offence carries a minimum fine of $85.[58] On the contrary, drivers operating a motor vehicle with defective (i.e. unreadable) number plates can be charged with the same offence.[57] This has left defective number plate owners with little choice but to obtain replacement plates from the MTO, orders which have taken months (or over six months for customised plates) to process.[56]
Several motorists sought other solutions to prevent their number plates from deterioration, such as placing the front plate on the dashboard instead of affixing it to the front bumper.[59] Others have omitted the front licence plate altogether since it is not uncommon to see out-of-province vehicles on Ontario roadways (many jurisdictions in North America, including neighbouring Quebec and Michigan, do not require front plates). In most cases, vehicle owners who attempted the aforementioned solutions were convicted of the same offence (HTA section 13.2).[59]
On 15 February 2020, two weeks after the province began issuing plates with the new design, off-duty Kingston Police Sergeant Steve Koopman posted a photo on Twitter showing a vehicle with the new plate at night, stating that "they're virtually unreadable at night".[60] Government spokesperson Lisa Thompson, the Minister of Government and Consumer Services, stated in a news conference that the new design had undergone a "rigorous testing program", that the government had consulted with "key stakeholders" including law enforcement, and that the plates were not problematic.[60][61] She also criticized the earlier "Liberal plates",[60] referring to a batch of plates issued during a previous government that peeled. Thompson stated that manufacturing and quality control are the responsibility of 3M.[61] The redesigned plates also caused problems for photo radar cameras, which have difficulty reading the name of the jurisdiction. The name is rendered in a smaller font size than earlier plates.[61] The president of the Toronto Police Association stated that the organization had not been consulted on the new design.[60]
The Ford Government had insisted for days that there was not an issue with the plates; however, on February 20, it announced that 3M would make an "enhanced licence plate" to be available in less than three weeks.[62] On February 28, the government announced that the distribution of the defective plates would cease on March 4, that the enhanced plates would be ready by March 16 at "no cost to Ontario taxpayers", those who had already been issued the new plates will receive the enhanced version in the mail, and until the enhanced plates were ready, the government switched back to the previous plate design.[63][64] This design was later scrapped on May 6.[20]
On February 22, 2022, the Ford Government eliminated licence plate renewal fees and the requirement to have a licence plate sticker for the nearly eight million passenger vehicles, light-duty trucks, motorcycles and mopeds, effective March 13, 2022.[65]